2016 JK JK – RockJock 4×4’s Shop JK
FollowVehicle Quick Facts
Profile ID: 62305
Year: 2016
Make:
Model: JK
Markets: Off Road
Vehicle Type: American
Contact: RockJock 4×4 by John Currie
Vehicle Story
RockJock 4x4's 2016 JK Wrangler Rubicon Unlimited was purchased by RockJock in 2023 in stock, low-mileage configuration. Why a JK you might ask? R&D of course! After the success of our High Steer Knuckle Kits for JL & JT, the people spoke! We needed a High Steer Knuckle Kit for a JK.
We found literally the cleanest JK we could for a base and installed every component we make on it. It then became the testbed vehicle for our high steer development.
The finished product was debuted at the Moab Easter Jeep Safari in 2024. It's final configuration is what you see here, a clean, 37" tire, daily driver rock crawler.
Drivetrain consists of the stock 3.6L V-6, stock automatic transmission and stock transfer case. Interior is 100% stock.
Our builds are constantly evolving when new ideas come along, so if you've seen this vehicle once - it'll probably be different by the next time you see it!
Tech Sheet
Chassis
- Control Arms: RockJock 4×4 by John Currie - Johnny Joint Adjustable Control Arms from RockJock 4x4.
- Links/Kits: RockJock 4×4 by John Currie - 4-link front and rear with Johnny Joint Control Arms from RockJock 4x4.
- Panhard Rod: RockJock 4×4 by John Currie - RockJock 4x4 front and rear trac bars with Johnny Joint rod ends on both ends.
- Rod Ends: RockJock 4×4 by John Currie - Johnny Joint Rod Ends.
- Shocks: Fox
- Skid Plates: Artec Industries
- Spindles: RockJock 4×4 by John Currie - RockJock 4x4's High Steer Knuckle Kit.
- Springs: RockJock 4×4 by John Currie - 4" lift from RockJock 4x4.
- Steering: RockJock 4×4 by John Currie - Currectlync Steering System from RockJock 4x4.
- Suspension kit: RockJock 4×4 by John Currie - RockJock 4x4 Pro Edition Suspension System.
- Sway Bars: RockJock 4×4 by John Currie - RockJock's Antirock Sway Bars front and rear with all forged chromoly options (arms/frame brackets).
- Winch: Warn Industries, Inc.
Drivetrain
- Axle/CV shaft: Spicer Drivetrain Products
- Bearings: The Timken Company
- Lubricants: Torco
- Ring/Pinion: Motive Gear - 4.88 ratio.
- Tires: Nitto Tire U.S.A. Inc. - 37" x 12.50" x 17".
- U Joints: Spicer Drivetrain Products - 1350.
- Wheels: KMC Wheels - 17" x 9 1/2" x 4.5" backspace.
- Yokes: Spicer Drivetrain Products - 1350.
Exterior
- Bumpers: CRC – Casey Currie
- Fender Flares: FiberwerX Off Road Fiberglass
- Rock sliders: CRC – Casey Currie
