2019 Jeep JL – RockJock 4×4’s Shop JL
FollowVehicle Quick Facts
Profile ID: 62266
Year: 2019
Make: Jeep
Model: JL
Markets: Off Road
Vehicle Type: American
Contact: RockJock 4×4 by John Currie
Vehicle Story
RockJock 4x4's 2019 JL Wrangler Unlimited was purchased new in 2019 by John Currie. In stock configuration, it was taken apart and put back to stock numerous times to illustrate installation of our (RockJock) products in the interest of documentation for instruction manuals and instructional videos.
It's final configuration is what you see here, a 1-ton axle, 40" tire, literally go anywhere rock crawler - while still remaining a daily driver.
Drivetrain consists of the stock 3.6L V-6, stock automatic transmission and stock transfer case. Interior is 100% stock.
Our builds are constantly evolving when new ideas come along, so if you've seen this vehicle once - it'll probably be different by the next time you see it!
Tech Sheet
Chassis
- Links/Kits: RockJock 4×4 by John Currie - Billet Aluminum RockJock Long Arm Suspension with RockNuts.
- Control Arms: RockJock 4×4 by John Currie - Billet Aluminum RockNut Long Arm Control Arms from RockJock 4x4.
- Panhard Rod: RockJock 4×4 by John Currie - RockJock 4x4 front and rear trac bars with Johnny Joint rod ends on both ends.
- Rod Ends: RockJock 4×4 by John Currie - Johnny Joints.
- Shocks: Fox
- Skid Plates: Artec Industries
- Springs: RockJock 4×4 by John Currie - RockJock 4x4 4" lift.
- Steering: PSC Motorsports - RockJock 4x4's Modular Extreme Duty Tie Rod and Drag Link.
- Suspension kit: RockJock 4×4 by John Currie - RockJock 4x4 Suspension System upgraded with RockJock's billet aluminum long arm kit.
- Sway Bars: RockJock 4×4 by John Currie - RockJock's Antirock Sway Bars front and rear with all forged chromoly options (arms/frame brackets).
- Winch: Warn Industries, Inc.
Drivetrain
- Axle Housing: Currie Enterprises - Currie 60 front / Currie 70 rear.
- Axle/CV shaft: Currie Enterprises
- Bearings: The Timken Company
- Differential Cover: Currie Enterprises
- Driveshaft: JE Reel Driveline
- Locker: EATON - E-Lockers front and rear.
- Locking Hubs: Warn Industries, Inc.
- Lubricants: Torco
- Ring/Pinion: Motive Gear - 5.38 ratio.
- Tires: Nitto Tire U.S.A. Inc. - 40" x 13.50" x 17".
- U Joints: Spicer Drivetrain Products - 1350.
- Wheels: KMC Wheels - 17" x 9 1/2" x 4.5" backspace.
- Yokes: Spicer Drivetrain Products - 1350.
Exterior
- Bumpers: CRC – Casey Currie
- Fender Flares: American Adventure Lab - High-line fender braces with daytime running lights.
- Rock sliders: CRC – Casey Currie