2020 Jeep Gladiator – RockJock 4×4’s Shop JT
FollowVehicle Quick Facts
Profile ID: 62274
Year: 2020
Make: Jeep
Model: Gladiator
Markets: Off Road
Vehicle Type: American
Contact: RockJock 4×4 by John Currie
Vehicle Story
RockJock 4x4's 2020 JT Gladiator Mojave was purchased new in 2020 by John Currie. In stock configuration, it was used to develop all of our RockJock Gladiator components as well as researching and developing components that are specific to the Mojave model.
It's final configuration is what you see here, a 1-ton axle, 42" tire, literally go anywhere rock crawler - while still remaining a daily driver.
Drivetrain consists of the stock 3.6L V-6, stock automatic transmission and stock transfer case. Interior is 100% stock.
Our builds are constantly evolving when new ideas come along, so if you've seen this vehicle once - it'll probably be different by the next time you see it!
Tech Sheet
Chassis
- Control Arms: RockJock 4×4 by John Currie - Billet Aluminum RockNut Control Arms from RockJock 4x4.
- Links/Kits: RockJock 4×4 by John Currie - 4-link front and rear with Billet Aluminum RockNut Control Arms from RockJock 4x4.
- Panhard Rod: RockJock 4×4 by John Currie - RockJock 4x4 front and rear trac bars with Johnny Joint rod ends on both ends.
- Rod Ends: RockJock 4×4 by John Currie - Johnny Joint Rod Ends.
- Shocks: Fox
- Skid Plates: Artec Industries
- Springs: RockJock 4×4 by John Currie - 3.5" lift from RockJock 4x4.
- Steering: RockJock 4×4 by John Currie - RockJock 4x4's RockNut Billet Aluminum Tie Rod and Drag Link.
- Suspension kit: RockJock 4×4 by John Currie - RockJock 4x4 Suspension System with RockJock's upgraded billet aluminum control arms.
- Sway Bars: RockJock 4×4 by John Currie - RockJock's Antirock Sway Bars front and rear with all billet aluminum options (arms/frame brackets).
- Winch: Warn Industries, Inc.
Drivetrain
- Axle Housing: Currie Enterprises - Currie 60 front / Currie 60 rear.
- Axle/CV shaft: Currie Enterprises
- Bearings: The Timken Company
- Differential: Currie Enterprises
- Differential Cover: Currie Enterprises
- Driveshaft: JE Reel Driveline
- Locker: EATON - E-Lockers front and rear.
- Locking Hubs: Warn Industries, Inc.
- Lubricants: Torco
- Ring/Pinion: Motive Gear - 5.38 ratio.
- Tires: Nitto Tire U.S.A. Inc. - 42" x 13.50" x 20".
- U Joints: Spicer Drivetrain Products - 1350.
- Wheels: KMC Wheels - 17" x 9 1/2" x 4.5" backspace.
- Yokes: Spicer Drivetrain Products - 1350.
Exterior
- Bumpers: Artec Industries
- Fender Flares: American Adventure Lab - High-line fender braces with daytime running lights.
- Rock sliders: Artec Industries
